Engine Version: for engines with dual-mass flywheel ;
Number of splines on input shaft: 26 ;
ArticleState: Normal ;
Technical Information: drive plate with damper springs ;
Technical Information: 3 in 1

Parameter: M 250 ;
Hub Profile: 28,7 x 26 VLO ;
Supplementary Article/Supplementary Info: with clutch pressure plate ;
Supplementary Article/Info 2: with clutch plate ;
Supplementary Article/Info 2: with releaser ;
ArticleState: Normal

Outer diameter [mm]: 251 mm ;
Number of Teeth: 26 ;
Weight [kg]: 6,655 kg ;
Observe service information: ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Diameter [mm]: 250 mm ;
Number of Teeth: 26 ;
ArticleState: Normal ;
Technical Information: Kit 3-teilig (druckplatte - kupplungsscheibe - ausrücklage)

Diameter [mm]: 250 mm ;
Engine Version: for engines with dual-mass flywheel ;
Supplementary Article/Info 2: Check and replace dual-mass flywheel if necessary. ;
ArticleState: Normal

Diameter [mm]: 250 mm ;
Hub Profile: 28,9x26,5-26N ;
ArticleState: Normal

Diameter [mm]: 250 mm ;
Hub Profile: 28.7 ;
Number of Teeth: 26 ;
Supplementary Article/Info 2: with bearing(s) ;
ArticleState: Normal

Diameter [mm]: 250 mm ;
Number of Teeth: 26 ;
for article number: RC90024 ;
ArticleState: Normal