Cone Size [mm]: 21.9 mm ;
Steering arm type: Control Arm ;
Weight [kg]: 8.3 kg ;
ArticleState: Normal ;
Installation Information: Wichtig: Einbauanleitung beachten ;
General Information: http://www.abs-bv.nl/product-detail/211070.html

Steering arm type: Control Arm ;
Fitting Position: Left ;
Fitting Position: Lower Front Axle ;
Cone Pitch: 1/6 ;
Cone Size [mm]: 22 mm ;
ArticleState: Normal

Required quantity: 1 ;
ArticleState: Normal

Length [mm]: 94 mm ;
Outer thread [mm]: M10 x 1,5 mm ;
Bolt Head-/Nut Design: Nut with flange ;
Thread Length [mm]: 82 mm ;
Quality/ Grade: 10.9 ;
Spanner Size: 16 ;
Bolt Head-/Nut Design: Male Hex ;
Weight [kg]: 0.059 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Fitting Position: Front Axle ;
Inner diameter [mm]: 14 mm ;
Outer diameter [mm]: 52 mm ;
Inner Length [mm]: 75 mm ;
Outer width [mm]: 48 mm ;
for OE number: 2E0407523A ;
Steering arm type: Wishbone (CV) ;
ArticleState: Normal

Paired article numbers: 10 93 7612 ;
Material: Sheet Steel ;
Steering arm type: Wishbone (CV) ;
Fitting Position: Front Axle Right ;
Fitting Position: Lower ;
ArticleState: Normal ;
General Information: mit Lagern, Gelenk und Sicherungsmutter ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Fitting Position: Front Axle ;
Fitting Position: Left ;
Steering arm type: Control Arm ;
Material: Sheet Steel ;
Weight [kg]: 8.198008 kg ;
ArticleState: Normal

Steering arm type: Control Arm ;
Supplementary Article/Info 2: with ball joint ;
Supplementary Article/Info 2: with rubber mounting ;
Required quantity: 1 ;
ArticleState: Normal

for OE number: 906 330 4007 ;
Fitting Position: Left Front ;
Steering arm type: Control Arm ;
ArticleState: Normal

Steering arm type: Control Arm ;
Cone Size [mm]: 21.9 mm ;
Cone Pitch: 1:6 ;
Thread Measurement 1: M12x1,5 ;
Thread Measurement 2: M20x1,5 ;
Inner diameter [mm]: 19.7 mm ;
Supplementary Article/Supplementary Info: with accessories ;
Paired article numbers: JTC2217 ;
ArticleState: on demand

Diameter [mm]: 62 mm ;
Steering arm type: Control Arm ;
Part number of the recommended special tools: V99-1020 ;
Fitting Position: Front Axle Right ;
Paired article numbers: V30-7603 ;
Axle alignment required after fitting: ;
Weight [kg]: 7.789 kg ;
ArticleState: Normal