Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Width [mm]: 12 mm ; ArticleState: Normal
15076400
Shaft Seal, crankshaft
Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 13 mm ; ArticleState: Normal
CORTECO
15027677B
Shaft Seal, crankshaft
Fitting Position: Timing End ; Inner diameter 1 [mm]: 66 mm ; Outer diameter 1 [mm]: 90 mm ; Height 1 [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Supplementary Article/Info 2: with mounting sleeves ; Swirl Type: Alternating Twist ; ArticleState: Normal
ELRING
323.772
Shaft Seal, crankshaft
Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: BS ; Swirl Type: Left-hand Twist ; Material: FPM (fluoride rubber) ; Dust Cover: with dust lip ; Sealant Paint: ; ArticleState: Normal
503.208
Shaft Seal, crankshaft
Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Left-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; ArticleState: Article to be discontinued ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
061.680
Shaft Seal, crankshaft
Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Right-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
749.983
Shaft Seal, crankshaft
Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: BS LA ; Swirl Type: Right-hand Twist ; Material: FPM (fluoride rubber) ; Dust Cover: with dust lip ; Sealant Paint: ; ArticleState: Normal
FEBI BILSTEIN
33144
Shaft Seal, crankshaft
Thickness [mm]: 12 mm ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Material: ACM (Polyacrylate) ; Material: PTFE (polytetrafluoroethylene) ; Fitting Position: Timing End ; Weight [kg]: 0,05 kg ; ArticleState: Normal ; General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
08041
Ring Gear, crankshaft
Inner diameter [mm]: 99,5 mm ; Outer diameter [mm]: 105 mm ; Supplementary Article/Info 2: for crankshaft ; Fitting Position: Front ; Weight [kg]: 0,14 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
44579
Shaft Seal, crankshaft
Thickness [mm]: 13 mm ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Material: ACM (Polyacrylate) ; Fitting Position: Transmission End ; Weight [kg]: 0,068 kg ; ArticleState: Normal ; General Information: für Motorgehäuse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
GLASER
P76496-01
Shaft Seal, crankshaft
Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: B SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
P76404-01
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: B SL ; Swirl Type: Left-hand Twist ; ArticleState: Normal
GLYCO
H049/7 0.25mm
Main Bearings, crankshaft
Position / Degree: 1,2,3,5,6,7 º ; Position / Degree: 4 º ; Component Number: 72-3772 ; Component Number: 72-3773H ; Oversize [mm]: 0,25 mm ; ArticleState: Normal
H049/7 STD
Main Bearings, crankshaft
Position / Degree: 1,2,3,5,6,7 º ; Position / Degree: 4 º ; Component Number: 72-3772 ; Component Number: 72-3773H ; Standard Size [STD]: ; ArticleState: Normal
GOETZE
50-305115-10
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 13 mm ; Rotation Direction: Anti-clockwise rotation ; Radial Shaft Seal Design: 829S LD ; Inner diameter [mm]: 110 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 130 mm ; ArticleState: Normal
50-306595-70
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 823S RD ; Inner diameter [mm]: 66 mm ; Material: FPM (fluoride rubber) ; Outer diameter [mm]: 90 mm ; ArticleState: Normal
MAHLE ORIGINAL
227 HS 20671 000
Crankshaft Bearing Set
Component Number: 227FL20670000 ; Component Number: 227HL20017000 ; for bearing clearance from [mm]: 0,04 mm ; to bearing clearance [mm]: 0,106 mm ; for housing diameter from [mm]: 82 mm ; to housing diameter [mm]: 82,022 mm ; Width from [mm]: 33,77 mm ; Width to [mm]: 33,83 mm ; for wall thickness from [mm]: 2,468 mm ; to wall thickness [mm]: 2,48 mm ; for flange growth from [mm]: 33,77 mm ; to flange growth [mm]: 33,83 mm ; for shaft diamater from [mm]: 76,981 mm ; to shaft diameter [mm]: 77 mm ; ArticleState: Normal
227 HS 20671 025
Crankshaft Bearing Set
Oversize [mm]: 0,25 mm ; Component Number: 227FL20670025 ; Component Number: 227HL20017025 ; for bearing clearance from [mm]: 0,04 mm ; to bearing clearance [mm]: 0,106 mm ; for housing diameter from [mm]: 82 mm ; to housing diameter [mm]: 82,022 mm ; Width from [mm]: 33,77 mm ; Width to [mm]: 33,83 mm ; for wall thickness from [mm]: 2,593 mm ; to wall thickness [mm]: 2,73 mm ; for flange growth from [mm]: 34,27 mm ; to flange growth [mm]: 34,33 mm ; for shaft diamater from [mm]: 76,981 mm ; to shaft diameter [mm]: 77 mm ; ArticleState: Article to be discontinued
PAYEN
NA5156
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 829S RD W ; Inner diameter [mm]: 66 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 90 mm ; ArticleState: Article to be discontinued
NF754
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 12 mm ; Rotation Direction: Anti-clockwise rotation ; Radial Shaft Seal Design: 823S LD ; Inner diameter [mm]: 110 mm ; Material: FPM (fluoride rubber) ; Outer diameter [mm]: 130 mm ; ArticleState: No longer supplied by manufacturer
NA5181
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 13 mm ; Rotation Direction: Anti-clockwise rotation ; Radial Shaft Seal Design: 829S LD W ; Inner diameter [mm]: 110 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 130 mm ; ArticleState: Normal
NB967
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 823S RD ; Inner diameter [mm]: 66 mm ; Material: FPM (fluoride rubber) ; Outer diameter [mm]: 90 mm ; ArticleState: Normal
SAMPA
021.261
Main Bearings, crankshaft
Inner diameter [mm]: 25 mm ; Outer diameter [mm]: 62 mm ; Height [mm]: 17 mm ; Weight [kg]: 0,51 kg ; ArticleState: Normal
021.451
Crankshaft
Supplementary Article/Info 2: without bearing(s) ; ArticleState: No longer supplied by manufacturer
021.453
Crankshaft
Supplementary Article/Info 2: without bearing(s) ; ArticleState: No longer supplied by manufacturer
021.454
Crankshaft
Supplementary Article/Info 2: without bearing(s) ; ArticleState: No longer supplied by manufacturer
VICTOR REINZ
81-27522-10
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: B SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
81-33801-00
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: B SL ; Swirl Type: Left-hand Twist ; ArticleState: Normal
WILMINK GROUP
WG1223986
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height 1 [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Swirl Type: Alternating Twist ; Supplementary Article/Info 2: with mounting sleeves ; Outer diameter 1 [mm]: 90 mm ; Inner diameter 1 [mm]: 66 mm ; ArticleState: Normal ; General Information: Corteco 15027677B
WG1213989
Crankshaft Bearing Set
for wall thickness from [mm]: 2,468 mm ; to wall thickness [mm]: 2,48 mm ; for shaft diamater from [mm]: 76,981 mm ; to shaft diameter [mm]: 77 mm ; for housing diameter from [mm]: 82 mm ; to housing diameter [mm]: 82,022 mm ; for bearing clearance from [mm]: 0,04 mm ; to bearing clearance [mm]: 0,106 mm ; for flange growth from [mm]: 33,77 mm ; to flange growth [mm]: 33,83 mm ; Width from [mm]: 33,77 mm ; Width to [mm]: 33,83 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 20671 000
WG1263343
Main Bearings, crankshaft
for wall thickness from [mm]: 2,593 mm ; to wall thickness [mm]: 2,73 mm ; for shaft diamater from [mm]: 76,981 mm ; to shaft diameter [mm]: 77 mm ; for housing diameter from [mm]: 82 mm ; to housing diameter [mm]: 82,022 mm ; for bearing clearance from [mm]: 0,04 mm ; to bearing clearance [mm]: 0,106 mm ; for flange growth from [mm]: 34,27 mm ; to flange growth [mm]: 34,33 mm ; Oversize [mm]: 0,25 mm ; Width from [mm]: 33,77 mm ; Width to [mm]: 33,83 mm ; ArticleState: Article to be discontinued ; General Information: Mahle 227 HS 20671 025
WG1086480
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: BS LA ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 749.983
WG1163312
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; ArticleState: Normal ; General Information: Ajusa 15048200
WG1183226
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Radial Shaft Seal Design: 829S LD W ; Rotation Direction: Anti-clockwise rotation ; ArticleState: Normal ; General Information: Payen NA5181
WG1190315
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 061.680
WG1093117
Main Bearings, crankshaft
Position / Degree: 1,2,3,5,6,7 º ; Position / Degree: 4 º ; Oversize [mm]: 0,25 mm ; ArticleState: Normal ; General Information: Glyco H049/7 0.25MM
WG1004597
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: B SL ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Glaser P76404-01
WG1103926
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: B SL ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Reinz 81-27522-10
WG1163546
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; ArticleState: Normal ; General Information: Ajusa 15076400
WG1183383
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Radial Shaft Seal Design: 823S RD ; Rotation Direction: Clockwise rotation ; ArticleState: Normal ; General Information: Payen NB967
WG1193232
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; ArticleState: Article to be discontinued ; General Information: Elring 503.208
WG1093118
Main Bearings, crankshaft
Position / Degree: 1,2,3,5,6,7 º ; Position / Degree: 4 º ; ArticleState: Normal ; General Information: Glyco H049/7 STD
WG1086365
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: BS ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 323.772
WG1103932
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: B SL ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Reinz 81-33801-00
WG1183213
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 66 mm ; Outer diameter [mm]: 90 mm ; Radial Shaft Seal Design: 829S RD W ; Rotation Direction: Clockwise rotation ; ArticleState: Article to be discontinued ; General Information: Payen NA5156
WG1183550
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 12 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Radial Shaft Seal Design: 823S LD ; Rotation Direction: Anti-clockwise rotation ; ArticleState: No longer supplied by manufacturer ; General Information: Payen NF754