SSG.ASIA - AUTO SPARE PARTS ONLINE STORE | UNITED ARAB EMIRATES (UAE)

Search by online catalogue

Search by supplier:
Supplier
Number
Part name
Criteria
Show Article Details
AJUSA 15072300 Shaft Seal, crankshaft
ArticleState: Normal
15105800 Shaft Seal, crankshaft
Inner diameter [mm]: 119 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 12 mm ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
ELRING 152.320 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
090.510 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Vehicle Equipment: for vehicles with air conditioning ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
FEBI BILSTEIN 40532 Shaft Seal, crankshaft
Engine Code: DC1601 ;
Vehicle Equipment: for vehicles with air conditioning ;
Reinforced Version: ;
Thickness [mm]: 13 mm ;
Inner diameter [mm]: 135 mm ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 185 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.14 kg ;
ArticleState: Normal ;
General Information: für Schwungrad ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
09895 Shaft Seal, crankshaft
Thickness [mm]: 15 mm ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Material: MVQ (Silicone Elastomer) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.105 kg ;
ArticleState: Normal ;
General Information: für Schwungrad ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
GLASER P77749-01 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
P77750-01 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
GOETZE 50-319620-00 Shaft Seal, crankshaft
TecDoc Engine Number: SCANIA DC 16.01 ;
Chassis number from: 69907 ;
Number of Doors: 4 ;
Exhaust System: in front of the catalyst ;
Chassis number from: 00803 ;
Number of Doors: 5 ;
Exhaust System: in front of the catalyst ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 145 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 175 mm ;
ArticleState: in Preparation
50-319621-00 Shaft Seal, crankshaft
TecDoc Engine Number: SCANIA DC 16.01 ;
Chassis number to: 66906 ;
Number of Doors: 4 ;
Exhaust System: in front of the catalyst ;
Chassis number to: 00802 ;
Number of Doors: 5 ;
Exhaust System: in front of the catalyst ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 155 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 185 mm ;
ArticleState: in Preparation
PAYEN NA5472 Shaft Seal, crankshaft
Chassis number to: 66906 ;
Number of Doors: 4 ;
Exhaust System: in front of the catalyst ;
Chassis number to: 00802 ;
Number of Doors: 5 ;
Exhaust System: in front of the catalyst ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 155 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 185 mm ;
ArticleState: in Preparation
NA5300 Shaft Seal, crankshaft
Chassis number from: 69907 ;
Number of Doors: 4 ;
Exhaust System: in front of the catalyst ;
Chassis number from: 00803 ;
Number of Doors: 5 ;
Exhaust System: in front of the catalyst ;
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: ASW ;
Inner diameter [mm]: 120 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 140 mm ;
ArticleState: Normal
NA5471 Shaft Seal, crankshaft
Chassis number to: 66906 ;
Number of Doors: 4 ;
Exhaust System: in front of the catalyst ;
Chassis number to: 00802 ;
Number of Doors: 5 ;
Exhaust System: in front of the catalyst ;
Chassis number from: 69907 ;
Number of Doors: 4 ;
Exhaust System: in front of the catalyst ;
Chassis number from: 00803 ;
Number of Doors: 5 ;
Exhaust System: in front of the catalyst ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 145 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 175 mm ;
ArticleState: in Preparation
SAMPA 041.146 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
041.143 Shaft Seal, crankshaft
Weight [kg]: 0.38 kg ;
Fitting Position: Timing End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
041.147 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
041.145 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: No longer supplied by manufacturer
041.149 Shaft Seal, crankshaft
Transmission Type: for manual transmission ;
Vehicle Equipment: for vehicles with/without air conditioning ;
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12.75 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
STELLOX 81-01377-SX Shaft Seal, crankshaft
Fitting Position: Timing End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 140 mm ;
Inner diameter 1 [mm]: 120 mm ;
ArticleState: Normal
VICTOR REINZ 81-35996-00 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
81-35997-00 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
WILMINK GROUP WG1151028 Shaft Seal, crankshaft
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 090.510
WG1250275 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35997-00
WG1151030 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 152.320
WG1250274 Shaft Seal, crankshaft
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: without twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35996-00
2024 CATCAR.INFO (v 2.0)