Diameter 1 [mm]: 8 mm ; Diameter 2 [mm]: 11.6 mm ; Diameter 3 [mm]: 14.8 mm ; Height [mm]: 10.9 mm ; Material: FPM (fluoride rubber) ; ArticleState: Normal
000.270
Shaft Seal, crankshaft
Inner diameter [mm]: 136 mm ; Outer diameter [mm]: 159 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Right-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
545.800
Shaft Seal, crankshaft
Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 180 mm ; Width [mm]: 15 mm ; Radial Shaft Seal Design: AW/B ; Swirl Type: Left-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
FEBI BILSTEIN
39899
Shaft Seal, crankshaft
Width [mm]: 15 mm ; Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 180 mm ; Fitting Position: Transmission End ; Weight [kg]: 0.165 kg ; ArticleState: Normal ; General Information: für Schwungrad
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
GLASER
P77476-01
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 136 mm ; Outer diameter [mm]: 159 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
P77796-01
Shaft Seal, crankshaft
Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 180 mm ; Width [mm]: 15 mm ; Radial Shaft Seal Design: AB SL ; Swirl Type: Left-hand Twist ; ArticleState: Normal
P76895-00
Seal, valve stem
ArticleState: Normal
VICTOR REINZ
70-37804-00
Seal, valve stem
ArticleState: Normal
81-38651-00
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 136 mm ; Outer diameter [mm]: 159 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
81-37941-00
Shaft Seal, crankshaft
Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 180 mm ; Width [mm]: 15 mm ; Radial Shaft Seal Design: AB SL ; Swirl Type: Left-hand Twist ; ArticleState: Normal
WILMINK GROUP
WG1246024
Seal, valve stem
ArticleState: Normal ; General Information: Reinz 70-37804-00
WG1705616
Seal, valve stem
ArticleState: Normal ; General Information: Glaser P76895-00