Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 172 mm ; Width [mm]: 13 mm ; ArticleState: Normal
15065800
Shaft Seal, crankshaft
Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Width [mm]: 11 mm ; ArticleState: Normal
CORTECO
15026914B
Shaft Seal, crankshaft
Fitting Position: Timing End ; Inner diameter 1 [mm]: 90 mm ; Outer diameter 1 [mm]: 110 mm ; Height 1 [mm]: 11 mm ; Material: PTFE (polytetrafluoroethylene) ; Dust Cover: with dust lip ; Swirl Type: Right-hand Twist ; Supplementary Article/Info 2: with mounting sleeves ; ArticleState: Normal
20026913B
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Inner diameter 1 [mm]: 150 mm ; Outer diameter 1 [mm]: 172 mm ; Height 1 [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeves ; ArticleState: Normal
20029787B
Shaft Seal, crankshaft
Fitting Position: Timing End ; Inner diameter 1 [mm]: 80 mm ; Outer diameter 1 [mm]: 100 mm ; Height 1 [mm]: 11 mm ; Material: PTFE (polytetrafluoroethylene) ; Dust Cover: with dust lip ; Swirl Type: Right-hand Twist ; ArticleState: No longer supplied by manufacturer
ELRING
353.110
Shaft Seal, crankshaft
Inner diameter [mm]: 85 mm ; Outer diameter [mm]: 110 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: ASW ; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; ArticleState: Normal
457.220
Shaft Seal, crankshaft
Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 172 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Left-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; Thickness [mm]: 13 mm ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
382.100
Shaft Seal, crankshaft
Inner diameter [mm]: 80 mm ; Outer diameter [mm]: 100 mm ; Width [mm]: 10 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Right-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
453.930
Shaft Seal, crankshaft
Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Width [mm]: 11 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Right-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
GLYCO
A207/4 STD
Thrust Washer, crankshaft
Component Number: 66476BF ; Standard Size [STD]: ; ArticleState: Normal
H1050/7 0.50mm
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 66476CP ; Oversize [mm]: 0.5 mm ; ArticleState: Normal ; Technical Information: Undersize bearings width 0.75/1.00 mm is 34.6/1.3622" wide
(semi) and resizeable to Std.
H1050/7 STD
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 66476CP ; Standard Size [STD]: ; ArticleState: Normal ; Technical Information: Undersize bearings width 0.75/1.00 mm is 34.6/1.3622" wide
(semi) and resizeable to Std.
GOETZE
50-319612-00
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 13 mm ; Rotation Direction: Anti-clockwise rotation ; Inner diameter [mm]: 150 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Outer diameter [mm]: 172 mm ; ArticleState: in Preparation
50-319623-00
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 13 mm ; Rotation Direction: Clockwise rotation ; Inner diameter [mm]: 80 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Outer diameter [mm]: 100 mm ; ArticleState: Normal
MAHLE ORIGINAL
209 HS 20228 050
Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ; Component Number: 209HL20227050 ; ArticleState: Normal
209 HS 20230 050
Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ; Component Number: 209HL20229050 ; for bearing clearance from [mm]: 0.048 mm ; to bearing clearance [mm]: 0.112 mm ; for housing diameter from [mm]: 102 mm ; to housing diameter [mm]: 102.022 mm ; Width from [mm]: 33.75 mm ; Width to [mm]: 34 mm ; for wall thickness from [mm]: 3.222 mm ; to wall thickness [mm]: 3.482 mm ; for shaft diamater from [mm]: 95.966 mm ; to shaft diameter [mm]: 95.988 mm ; ArticleState: Article to be discontinued
209 HS 20228 000
Crankshaft Bearing Set
Component Number: 209HL20227000 ; ArticleState: Normal
209 HS 20230 000
Crankshaft Bearing Set
Component Number: 209HL20229000 ; for bearing clearance from [mm]: 0.048 mm ; to bearing clearance [mm]: 0.112 mm ; for housing diameter from [mm]: 102 mm ; to housing diameter [mm]: 102.022 mm ; Width from [mm]: 33.75 mm ; Width to [mm]: 34 mm ; for wall thickness from [mm]: 2.972 mm ; to wall thickness [mm]: 2.982 mm ; for shaft diamater from [mm]: 95.966 mm ; to shaft diameter [mm]: 95.988 mm ; ArticleState: Normal
209 HS 20228 025
Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ; Component Number: 209HL20227025 ; ArticleState: Normal
209 HS 20230 025
Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ; Component Number: 209HL20229025 ; for bearing clearance from [mm]: 0.048 mm ; to bearing clearance [mm]: 0.112 mm ; for housing diameter from [mm]: 102 mm ; to housing diameter [mm]: 102.022 mm ; Width from [mm]: 33.75 mm ; Width to [mm]: 34 mm ; for wall thickness from [mm]: 3.097 mm ; to wall thickness [mm]: 3.232 mm ; for shaft diamater from [mm]: 95.966 mm ; to shaft diameter [mm]: 95.988 mm ; ArticleState: Normal
MEYLE
16-34 099 0003
Shaft Seal, crankshaft
Fitting Position: Timing End ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Height [mm]: 11 mm ; Swirl Type: Right-hand Twist ; ArticleState: Normal
16-34 099 0004
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 172 mm ; Height [mm]: 13 mm ; Swirl Type: Left-hand Twist ; ArticleState: Normal
PAYEN
NF832
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 11 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: Sp ; Inner diameter [mm]: 90 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 110 mm ; ArticleState: No longer supplied by manufacturer
SAMPA
079.358
Crankshaft
Supplementary Article/Info 2: without bearing(s) ; ArticleState: No longer supplied by manufacturer
079.083
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Height [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene) ; ArticleState: No longer supplied by manufacturer
079.094
Shaft Seal, crankshaft
Weight [kg]: 1 kg ; Fitting Position: Transmission End ; Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 172 mm ; Height [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; ArticleState: Normal
079.084
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Inner diameter [mm]: 110 mm ; Outer diameter [mm]: 130 mm ; Height [mm]: 13 mm ; Material: FPM (fluoride rubber) ; ArticleState: No longer supplied by manufacturer
079.100
Shaft Seal, crankshaft
Fitting Position: Timing End ; Inner diameter [mm]: 60 mm ; Outer diameter [mm]: 75 mm ; Height [mm]: 10 mm ; Material: FPM (fluoride rubber) ; ArticleState: Normal
079.356
Crankshaft
Supplementary Article/Info 2: without bearing(s) ; Weight [kg]: 94.6 kg ; ArticleState: No longer supplied by manufacturer
079.081
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Inner diameter [mm]: 160 mm ; Outer diameter [mm]: 190 mm ; Height [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; ArticleState: Normal
079.093
Shaft Seal, crankshaft
Fitting Position: Timing End ; Inner diameter [mm]: 80 mm ; Outer diameter [mm]: 100 mm ; Height [mm]: 11 mm ; Material: PTFE (polytetrafluoroethylene) ; ArticleState: No longer supplied by manufacturer
021.261
Main Bearings, crankshaft
Weight [kg]: 0.51 kg ; Inner diameter [mm]: 25 mm ; Outer diameter [mm]: 62 mm ; Height [mm]: 17 mm ; ArticleState: Normal
WILMINK GROUP
WG1262959
Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ; ArticleState: Normal ; General Information: Mahle 209 HS 20228 025
WG1262962
Crankshaft Bearing Set
for wall thickness from [mm]: 3.222 mm ; to wall thickness [mm]: 3.482 mm ; for shaft diamater from [mm]: 95.966 mm ; to shaft diameter [mm]: 95.988 mm ; for housing diameter from [mm]: 102 mm ; to housing diameter [mm]: 102.022 mm ; for bearing clearance from [mm]: 0.048 mm ; to bearing clearance [mm]: 0.112 mm ; Oversize [mm]: 0.5 mm ; Width from [mm]: 33.75 mm ; Width to [mm]: 34 mm ; ArticleState: Article to be discontinued ; General Information: Mahle 209 HS 20230 050
WG1163445
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 172 mm ; ArticleState: Normal ; General Information: Ajusa 15065500
WG1192893
Shaft Seal, crankshaft
Thickness [mm]: 13 mm ; Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 150 mm ; Outer diameter [mm]: 172 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Elring 457.220
WG1186125
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Oversize [mm]: 0.5 mm ; ArticleState: Normal ; General Information: Glyco H1050/7 0.50MM
WG1185926
Thrust Washer, crankshaft
ArticleState: Normal ; General Information: Glyco A207/4 STD
WG1105156
Crankshaft Bearing Set
ArticleState: Normal ; General Information: Mahle 209 HS 20228 000
WG1262960
Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ; ArticleState: Normal ; General Information: Mahle 209 HS 20228 050
WG1163448
Shaft Seal, crankshaft
Width [mm]: 11 mm ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; ArticleState: Normal ; General Information: Ajusa 15065800
WG1223983
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height 1 [mm]: 11 mm ; Material: PTFE (polytetrafluoroethylene) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeves ; Outer diameter 1 [mm]: 110 mm ; Inner diameter 1 [mm]: 90 mm ; ArticleState: Normal ; General Information: Corteco 15026914B
WG1186126
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; ArticleState: Normal ; General Information: Glyco H1050/7 STD
WG1213833
Crankshaft Bearing Set
for wall thickness from [mm]: 2.972 mm ; to wall thickness [mm]: 2.982 mm ; for shaft diamater from [mm]: 95.966 mm ; to shaft diameter [mm]: 95.988 mm ; for housing diameter from [mm]: 102 mm ; to housing diameter [mm]: 102.022 mm ; for bearing clearance from [mm]: 0.048 mm ; to bearing clearance [mm]: 0.112 mm ; Width from [mm]: 33.75 mm ; Width to [mm]: 34 mm ; ArticleState: Normal ; General Information: Mahle 209 HS 20230 000
WG1262961
Crankshaft Bearing Set
for wall thickness from [mm]: 3.097 mm ; to wall thickness [mm]: 3.232 mm ; for shaft diamater from [mm]: 95.966 mm ; to shaft diameter [mm]: 95.988 mm ; for housing diameter from [mm]: 102 mm ; to housing diameter [mm]: 102.022 mm ; for bearing clearance from [mm]: 0.048 mm ; to bearing clearance [mm]: 0.112 mm ; Oversize [mm]: 0.25 mm ; Width from [mm]: 33.75 mm ; Width to [mm]: 34 mm ; ArticleState: Normal ; General Information: Mahle 209 HS 20230 025
WG1087173
Shaft Seal, crankshaft
Width [mm]: 10 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 80 mm ; Outer diameter [mm]: 100 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Elring 382.100
WG1192858
Shaft Seal, crankshaft
Width [mm]: 11 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Elring 453.930
WG1226525
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height 1 [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeves ; Outer diameter 1 [mm]: 172 mm ; Inner diameter 1 [mm]: 150 mm ; ArticleState: Normal ; General Information: Corteco 20026913B