Inner diameter [mm]: 100 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Right-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
828.637
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; for components see parts list: ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
766.828
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Additionally required articles (article numbers): 834.289 ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: No longer supplied by manufacturer ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
766.829
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Additionally required articles (article numbers): 834.289 ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
ET ENGINETEAM
HK0173
Crankshaft
TecDoc Engine Number: MAN D 2066 LUH 12 ; ArticleState: Normal
GLYCO
H1239/7 0.50mm
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Oversize [mm]: 0.5 mm ; ArticleState: Normal ; Technical Information: G-188
H1239/7 STD
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Standard Size [STD]: ; ArticleState: Normal ; Technical Information: The following procedures must be carried out according to
the manufacturer's manual: 1) Drill two holes in the bearin
for the valve rocker's oil supply corresponding to the
position of the oil channels in the housing. 2) Drill one
dowel hole.
H1239/7 0.25mm
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Oversize [mm]: 0.25 mm ; ArticleState: Normal ; Technical Information: "SPUTTER" lower half bearing
A159/4 STD
Thrust Washer, crankshaft
TecDoc Engine Number: MAN D 2066 LUH 12 ; Component Number: 04-3947 ; Component Number: 04-3948 ; Standard Size [STD]: ; ArticleState: Normal
GOETZE
50-305151-00
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 13 mm ; Rotation Direction: Anti-clockwise rotation ; Radial Shaft Seal Design: 823S LD ; Inner diameter [mm]: 120 mm ; Material: ACM (Polyacrylate) ; Outer diameter [mm]: 140 mm ; ArticleState: No longer supplied by manufacturer
50-319567-00
Shaft Seal, crankshaft
TecDoc Engine Number: MAN D 2066 LUH 12 ; Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 829S RD W ; Inner diameter [mm]: 100 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 130 mm ; ArticleState: Normal
MAHLE ORIGINAL
227 AS 20876 000
Thrust Washer, crankshaft
Component Number: 227AL20875000 ; for housing diameter from [mm]: 137.65 mm ; to housing diameter [mm]: 138 mm ; for wall thickness from [mm]: 3.35 mm ; to wall thickness [mm]: 3.4 mm ; for shaft diamater from [mm]: 114.4 mm ; to shaft diameter [mm]: 114.75 mm ; ArticleState: Normal
227 HS 21013 050
Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ; Component Number: 227HL21012050 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
227 HS 21013 000
Crankshaft Bearing Set
Component Number: 227HL21012000 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
227 HS 21013 025
Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ; Component Number: 227HL21012025 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
PAYEN
NA5450
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 829S RD W ; Inner diameter [mm]: 100 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 130 mm ; ArticleState: Normal
NB966
Shaft Seal, crankshaft
Fitting Position: Transmission End ; Height [mm]: 13 mm ; Rotation Direction: Anti-clockwise rotation ; Radial Shaft Seal Design: 823S LD ; Inner diameter [mm]: 120 mm ; Material: ACM (Polyacrylate) ; Outer diameter [mm]: 140 mm ; ArticleState: No longer supplied by manufacturer
WILMINK GROUP
WG1190942
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 100 mm ; Outer diameter [mm]: 130 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Elring 158.510
WG1186344
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Oversize [mm]: 0.25 mm ; ArticleState: Normal ; General Information: Glyco H1239/7 0.25MM
WG1263353
Crankshaft Bearing Set
for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Oversize [mm]: 0.5 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 050
WG1195330
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 828.637
WG1186345
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Oversize [mm]: 0.5 mm ; ArticleState: Normal ; General Information: Glyco H1239/7 0.50MM
WG1093003
Thrust Washer, crankshaft
ArticleState: Normal ; General Information: Glyco A159/4 STD
WG1213991
Crankshaft Bearing Set
for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 000
WG1147605
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 766.829
WG1093961
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; ArticleState: Normal ; General Information: Glyco H1239/7 STD
WG1246896
Ring Gear, crankshaft
TecDoc Engine Number: AUDI ACE ; Fitting Position: Transmission End ; Thickness [mm]: 21 mm ; ArticleState: Normal ; General Information: Reinz 71-28368-00
WG1263352
Crankshaft Bearing Set
for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Oversize [mm]: 0.25 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 025