SSG.ASIA - AUTO SPARE PARTS ONLINE STORE | UNITED ARAB EMIRATES (UAE)

Search by online catalogue

Search by supplier:
Supplier
Number
Part name
Criteria
Show Article Details
CORTECO 01016688B Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 120 mm ;
Outer diameter 1 [mm]: 140 mm ;
Height 1 [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Dust Cover: with dust lip ;
Swirl Type: Left-hand Twist ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
01017541B Shaft Seal, crankshaft
Version: ONLY SEAL ;
Fitting Position: Timing End ;
Inner diameter 1 [mm]: 105 mm ;
Outer diameter 1 [mm]: 130 mm ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Dust Cover: with dust lip ;
Swirl Type: Right-hand Twist ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
ELRING 766.828 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Additionally required articles (article numbers): 834.289 ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
ArticleState: No longer supplied by manufacturer ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
766.829 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Additionally required articles (article numbers): 834.289 ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
158.510 Shaft Seal, crankshaft
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
828.637 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
for components see parts list: ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
ET ENGINETEAM HK0173 Crankshaft
ArticleState: Normal
FEBI BILSTEIN 33142 Shaft Seal, crankshaft
Thickness [mm]: 12 mm ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Supplementary Info: with sealing lip ;
Fitting Position: Timing End ;
Weight [kg]: 0.12 kg ;
ArticleState: Normal ;
General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
44579 Shaft Seal, crankshaft
Thickness [mm]: 13 mm ;
Inner diameter [mm]: 110 mm ;
Outer diameter [mm]: 130 mm ;
Material: ACM (Polyacrylate) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.068 kg ;
ArticleState: Normal ;
General Information: für Motorgehäuse ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
07720 Ring Gear, crankshaft
Engine Code: D2066LUH22 ;
Engine Code: D2066LUH27 ;
Width [mm]: 21 mm ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
Weight [kg]: 0.154 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
01203 Shaft Seal, crankshaft
Width [mm]: 13 mm ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Colour: Black ;
Material: ACM (Polyacrylate) ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.097 kg ;
ArticleState: Normal ;
General Information: für Motorgehäuse ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
33143 Shaft Seal, crankshaft
Thickness [mm]: 12 mm ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Material: ACM (Polyacrylate) ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Timing End ;
Weight [kg]: 0.12 kg ;
ArticleState: Normal ;
General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
11481 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Material: ACM (Polyacrylate) ;
Fitting Position: Timing End ;
Weight [kg]: 0.108 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
33144 Shaft Seal, crankshaft
Thickness [mm]: 12 mm ;
Inner diameter [mm]: 66 mm ;
Outer diameter [mm]: 90 mm ;
Material: ACM (Polyacrylate) ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Timing End ;
Weight [kg]: 0.05 kg ;
ArticleState: Normal ;
General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
GLASER X59555-01 Ring Gear, crankshaft
Thickness [mm]: 21 mm ;
Fitting Position: Transmission End ;
ArticleState: Normal
P77475-01 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
P76497-01 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
GLYCO H1239/7 STD Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4527 ;
Standard Size [STD]: ;
ArticleState: Normal ;
Technical Information: The following procedures must be carried out according to the manufacturer's manual: 1) Drill two holes in the bearin for the valve rocker's oil supply corresponding to the position of the oil channels in the housing. 2) Drill one dowel hole.
H1239/7 0.25mm Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4527 ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
Technical Information: "SPUTTER" lower half bearing
H1239/7 0.50mm Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4527 ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
Technical Information: G-188
A159/4 STD Thrust Washer, crankshaft
Component Number: 04-3947 ;
Component Number: 04-3948 ;
Standard Size [STD]: ;
ArticleState: Normal
GOETZE 50-305151-00 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 823S LD ;
Inner diameter [mm]: 120 mm ;
Material: ACM (Polyacrylate) ;
Outer diameter [mm]: 140 mm ;
ArticleState: No longer supplied by manufacturer
50-319567-00 Shaft Seal, crankshaft
TecDoc Engine Number: MAN D 2066 LUH 12 ;
TecDoc Engine Number: MAN D 2066 LUH 22 ;
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 100 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 130 mm ;
ArticleState: Normal
MAHLE ORIGINAL 227 AS 20876 000 Thrust Washer, crankshaft
Component Number: 227AL20875000 ;
for housing diameter from [mm]: 137.65 mm ;
to housing diameter [mm]: 138 mm ;
for wall thickness from [mm]: 3.35 mm ;
to wall thickness [mm]: 3.4 mm ;
for shaft diamater from [mm]: 114.4 mm ;
to shaft diameter [mm]: 114.75 mm ;
ArticleState: Normal
227 HS 21013 000 Crankshaft Bearing Set
Component Number: 227HL21012000 ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
for wall thickness from [mm]: 3.466 mm ;
to wall thickness [mm]: 3.478 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: Normal
227 HS 21013 025 Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ;
Component Number: 227HL21012025 ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
for wall thickness from [mm]: 3.591 mm ;
to wall thickness [mm]: 3.728 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: Normal
227 HS 21013 050 Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ;
Component Number: 227HL21012050 ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
for wall thickness from [mm]: 3.716 mm ;
to wall thickness [mm]: 3.978 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: Normal
PAYEN NA5450 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 100 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 130 mm ;
ArticleState: Normal
NB966 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 823S LD ;
Inner diameter [mm]: 120 mm ;
Material: ACM (Polyacrylate) ;
Outer diameter [mm]: 140 mm ;
ArticleState: No longer supplied by manufacturer
SAMPA 100.055/1 Ring Gear, crankshaft
Weight [kg]: 0.78 kg ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
Height [mm]: 21 mm ;
Machining: Hardened ;
ArticleState: Normal ;
Technical Information: Surface Hardened
021.449 Crankshaft
Supplementary Article/Info 2: without bearing(s) ;
Weight [kg]: 108 kg ;
ArticleState: No longer supplied by manufacturer
021.072 Shaft Seal, crankshaft
Weight [kg]: 1.04 kg ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
ArticleState: Normal
021.261 Main Bearings, crankshaft
Weight [kg]: 0.51 kg ;
Inner diameter [mm]: 25 mm ;
Outer diameter [mm]: 62 mm ;
Height [mm]: 17 mm ;
ArticleState: Normal
023.115 Ring Gear, crankshaft
Inner diameter [mm]: 97 mm ;
Outer diameter [mm]: 102.3 mm ;
Height [mm]: 17.6 mm ;
ArticleState: No longer supplied by manufacturer
021.452 Crankshaft
Supplementary Article/Info 2: without bearing(s) ;
Weight [kg]: 108.5 kg ;
ArticleState: No longer supplied by manufacturer
021.075 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Height [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
ArticleState: No longer supplied by manufacturer
100.055 Ring Gear, crankshaft
Weight [kg]: 0.76 kg ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
Height [mm]: 21 mm ;
ArticleState: No longer supplied by manufacturer ;
Technical Information: No Hardened
021.453 Crankshaft
Supplementary Article/Info 2: without bearing(s) ;
ArticleState: No longer supplied by manufacturer
010.216 Shaft Seal, crankshaft
Weight [kg]: 0.5 kg ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 13 mm ;
Material: FPM (fluoride rubber) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
ArticleState: Normal
ST-TEMPLIN 08.160.1905.980 Ring Gear, crankshaft
Thickness [mm]: 22 mm ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
ArticleState: Normal
VICTOR REINZ 81-23113-30 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
81-38069-00 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
71-28368-00 Ring Gear, crankshaft
Thickness [mm]: 21 mm ;
Fitting Position: Transmission End ;
ArticleState: Normal
WILMINK GROUP WG1186344 Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
General Information: Glyco H1239/7 0.25MM
WG1213991 Crankshaft Bearing Set
for wall thickness from [mm]: 3.466 mm ;
to wall thickness [mm]: 3.478 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
ArticleState: Normal ;
General Information: Mahle 227 HS 21013 000
WG1103957 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: AB ;
ArticleState: Normal ;
General Information: Reinz 81-38069-00
WG1195330 Shaft Seal, crankshaft
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 828.637
WG1186345 Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
General Information: Glyco H1239/7 0.50MM
WG1093003 Thrust Washer, crankshaft
ArticleState: Normal ;
General Information: Glyco A159/4 STD
WG1246896 Ring Gear, crankshaft
Fitting Position: Transmission End ;
Thickness [mm]: 21 mm ;
ArticleState: Normal ;
General Information: Reinz 71-28368-00
WG1263352 Crankshaft Bearing Set
for wall thickness from [mm]: 3.591 mm ;
to wall thickness [mm]: 3.728 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Oversize [mm]: 0.25 mm ;
Width from [mm]: 36 mm ;
ArticleState: Normal ;
General Information: Mahle 227 HS 21013 025
WG1147605 Shaft Seal, crankshaft
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 766.829
WG1220093 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Height 1 [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 140 mm ;
Inner diameter 1 [mm]: 120 mm ;
ArticleState: Normal ;
General Information: Corteco 01016688B
WG1093961 Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
ArticleState: Normal ;
General Information: Glyco H1239/7 STD
WG1103916 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AB SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-23113-30
WG1263353 Crankshaft Bearing Set
for wall thickness from [mm]: 3.716 mm ;
to wall thickness [mm]: 3.978 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Oversize [mm]: 0.5 mm ;
Width from [mm]: 36 mm ;
ArticleState: Normal ;
General Information: Mahle 227 HS 21013 050
WG1190942 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Elring 158.510
WG1220144 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 130 mm ;
Inner diameter 1 [mm]: 105 mm ;
ArticleState: Normal ;
General Information: Corteco 01017541B
2024 CATCAR.INFO (v 2.0)