Sensor Type: Primary engine speed sensor ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/0281002426
0 258 007 032
Lambda Sensor
Lambda Sensor: Regulating Probe ; Exhaust System: in front of the catalyst ; Conductor Number: 5 condutores ; Overall Length [mm]: 1000 mm ; Recommended replace interval [km]: 160000 km ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/0258007032
0 281 002 011
Sensor, fuel temperature
Construction year to: 08.2011 ; ArticleState: Normal
0 232 103 006
Sensor, camshaft position
ArticleState: Normal
0 281 002 427
RPM Sensor, engine management
Sensor Type: Secondary engine speed sensor ; ArticleState: Normal
0 281 006 273
Sensor, fuel temperature
Construction year from: 09.2011 ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/0281006273
0 281 002 655
Sensor, boost pressure
ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/0281002655
FAE
75070
Lambda Sensor
Lambda Sensor: Broadband lambda probe ; Housing Colour: Black ; Length [mm]: 1000 mm ; Number of Poles: 6 pólos ; ArticleState: Normal
FEBI BILSTEIN
46233
RPM Sensor, engine management
Length [mm]: 34.5 mm ; Inner diameter [mm]: 6.7 mm ; Outer diameter [mm]: 17.8 mm ; Number of connectors: 2 ; Supplementary Article/Info 2: for camshaft ; Weight [kg]: 0.043 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
48588
Sender Unit, intake air temperature
Length [mm]: 64 mm ; Outer thread [mm]: M16 x 1,5 mm ; Spanner Size: 27 ; Number of connectors: 2 ; Screw length below head [mm]: 25 mm ; Weight [kg]: 0.056 kg ; ArticleState: Normal ; General Information: für Ansaugrohr
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.