Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Additionally required articles (article numbers): 834.289 ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: No longer supplied by manufacturer ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
766.853
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; Additionally required articles (article numbers): 834.270 ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Right-hand Twist ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
766.829
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Additionally required articles (article numbers): 834.289 ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
828.637
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; for components see parts list: ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
766.852
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Material: Felt ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; Additionally required articles (article numbers): 834.270 ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Right-hand Twist ; ArticleState: No longer supplied by manufacturer ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
828.645
Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; for components see parts list: ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Right-hand Twist ; ArticleState: No longer supplied by manufacturer ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
FEBI BILSTEIN
33142
Shaft Seal, crankshaft
Thickness [mm]: 12 mm ; Inner diameter [mm]: 100 mm ; Outer diameter [mm]: 130 mm ; Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Supplementary Article/Supplementary Info: with sealing lip ; Fitting Position: Timing End ; Weight [kg]: 0.12 kg ; ArticleState: Normal ; General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
01203
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Colour: Black ; Material: ACM (Polyacrylate) ; Material: PTFE (polytetrafluoroethylene) ; Fitting Position: Transmission End ; Weight [kg]: 0.097 kg ; ArticleState: Normal ; General Information: für Motorgehäuse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
33143
Shaft Seal, crankshaft
Thickness [mm]: 12 mm ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 140 mm ; Material: ACM (Polyacrylate) ; Material: PTFE (polytetrafluoroethylene) ; Fitting Position: Timing End ; Weight [kg]: 0.12 kg ; ArticleState: Normal ; General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
07720
Ring Gear, crankshaft
Engine Code: D2866LUH25 ; Engine Code: D2866LUH29 ; Engine Code: D2866LUH36 ; Engine Code: D2866LUH52 ; Width [mm]: 21 mm ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; Weight [kg]: 0.154 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
11481
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Material: ACM (Polyacrylate) ; Fitting Position: Timing End ; Weight [kg]: 0.108 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
GLYCO
H1239/7 0.50mm
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Oversize [mm]: 0.5 mm ; ArticleState: Normal ; Technical Information: G-188
H1239/7 STD
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Standard Size [STD]: ; ArticleState: Normal ; Technical Information: The following procedures must be carried out according to
the manufacturer's manual: 1) Drill two holes in the bearin
for the valve rocker's oil supply corresponding to the
position of the oil channels in the housing. 2) Drill one
dowel hole.
A159/4 STD
Thrust Washer, crankshaft
Component Number: 04-3947 ; Component Number: 04-3948 ; Standard Size [STD]: ; ArticleState: Normal
H1239/7 0.25mm
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Oversize [mm]: 0.25 mm ; ArticleState: Normal ; Technical Information: "SPUTTER" lower half bearing
GOETZE
50-307027-70
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 829S RD W ; Inner diameter [mm]: 105 mm ; Material: ACM (Polyacrylate) ; Material: FPM (fluoride rubber) ; Outer diameter [mm]: 130 mm ; ArticleState: Normal
MAHLE ORIGINAL
001 HS 18592 000
Crankshaft Bearing Set
Component Number: 001HL10220000 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
001 HS 18592 075
Crankshaft Bearing Set
Oversize [mm]: 0.75 mm ; Component Number: 001HL10220075 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.841 mm ; to wall thickness [mm]: 4.228 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
227 HS 21013 025
Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ; Component Number: 227HL21012025 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
001 HS 18592 025
Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ; Component Number: 001HL10220025 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
001 HS 18592 100
Crankshaft Bearing Set
Oversize [mm]: 1 mm ; Component Number: 001HL10220100 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.966 mm ; to wall thickness [mm]: 4.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
227 HS 21013 050
Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ; Component Number: 227HL21012050 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
001 HS 18592 050
Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ; Component Number: 001HL10220050 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
227 HS 21013 000
Crankshaft Bearing Set
Component Number: 227HL21012000 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
227 AS 20876 000
Thrust Washer, crankshaft
Component Number: 227AL20875000 ; for housing diameter from [mm]: 137.65 mm ; to housing diameter [mm]: 138 mm ; for wall thickness from [mm]: 3.35 mm ; to wall thickness [mm]: 3.4 mm ; for shaft diamater from [mm]: 114.4 mm ; to shaft diameter [mm]: 114.75 mm ; ArticleState: Normal
PAYEN
NB928
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 829S RD W ; Inner diameter [mm]: 105 mm ; Material: FPM (fluoride rubber) ; Outer diameter [mm]: 130 mm ; ArticleState: Normal
SAMPA
023.115
Ring Gear, crankshaft
Inner diameter [mm]: 97 mm ; Outer diameter [mm]: 102.3 mm ; Height [mm]: 17.6 mm ; ArticleState: No longer supplied by manufacturer
022.165
Hub, crankshaft
ArticleState: Normal
010.216
Shaft Seal, crankshaft
Weight [kg]: 0.5 kg ; Fitting Position: Transmission End ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Height [mm]: 13 mm ; Material: FPM (fluoride rubber) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; ArticleState: Normal
200.080
Main Bearings, crankshaft
Weight [kg]: 1.32 kg ; Inner diameter [mm]: 25 mm ; Outer diameter [mm]: 62 mm ; Height [mm]: 24 mm ; ArticleState: Normal
021.252
Ring Gear, crankshaft
Fitting Position: Front ; Inner diameter [mm]: 99.5 mm ; Outer diameter [mm]: 105 mm ; Outer diameter 1 [mm]: 108 mm ; Height [mm]: 18 mm ; ArticleState: No longer supplied by manufacturer ; Technical Information: No Hardened
100.055
Ring Gear, crankshaft
Weight [kg]: 0.76 kg ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; Height [mm]: 21 mm ; ArticleState: No longer supplied by manufacturer ; Technical Information: No Hardened
021.449
Crankshaft
Supplementary Article/Info 2: without bearing(s) ; Weight [kg]: 108 kg ; ArticleState: No longer supplied by manufacturer
021.072
Shaft Seal, crankshaft
Weight [kg]: 1.04 kg ; Fitting Position: Transmission End ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Height [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; ArticleState: Normal
021.252/1
Ring Gear, crankshaft
Fitting Position: Front ; Inner diameter [mm]: 99.5 mm ; Outer diameter [mm]: 105 mm ; Outer diameter 1 [mm]: 108 mm ; Height [mm]: 18 mm ; Machining: Hardened ; ArticleState: Normal ; Technical Information: Surface Hardened
100.055/1
Ring Gear, crankshaft
Weight [kg]: 0.78 kg ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; Height [mm]: 21 mm ; Machining: Hardened ; ArticleState: Normal ; Technical Information: Surface Hardened
021.452
Crankshaft
Supplementary Article/Info 2: without bearing(s) ; Weight [kg]: 108.5 kg ; ArticleState: No longer supplied by manufacturer
021.075
Shaft Seal, crankshaft
Fitting Position: Timing End ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Height [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; ArticleState: No longer supplied by manufacturer
021.261
Main Bearings, crankshaft
Weight [kg]: 0.51 kg ; Inner diameter [mm]: 25 mm ; Outer diameter [mm]: 62 mm ; Height [mm]: 17 mm ; ArticleState: Normal
ST-TEMPLIN
08.160.1905.980
Ring Gear, crankshaft
Thickness [mm]: 22 mm ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; ArticleState: Normal
WILMINK GROUP
WG1085626
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Material: Felt ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Article to be discontinued ; General Information: Elring 766.852
WG1263352
Crankshaft Bearing Set
for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Oversize [mm]: 0.25 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 025
WG1194955
Shaft Seal, crankshaft
Width [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Elring 766.853
WG1186345
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Oversize [mm]: 0.5 mm ; ArticleState: Normal ; General Information: Glyco H1239/7 0.50MM
WG1093003
Thrust Washer, crankshaft
ArticleState: Normal ; General Information: Glyco A159/4 STD
WG1147605
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 766.829
WG1263353
Crankshaft Bearing Set
for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Oversize [mm]: 0.5 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 050
WG1195330
Shaft Seal, crankshaft
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 828.637
WG1093961
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; ArticleState: Normal ; General Information: Glyco H1239/7 STD
WG1213991
Crankshaft Bearing Set
for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 000
WG1183373
Shaft Seal, crankshaft
Fitting Position: Timing End ; Height [mm]: 12 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 105 mm ; Outer diameter [mm]: 130 mm ; Radial Shaft Seal Design: 829S RD W ; Rotation Direction: Clockwise rotation ; ArticleState: Normal ; General Information: Payen NB928
WG1186344
Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ; Oversize [mm]: 0.25 mm ; ArticleState: Normal ; General Information: Glyco H1239/7 0.25MM