Operating Mode: Hydraulic ;
ArticleState: Normal

Fitting Position: Front ;
Component Number: 07-3088 ;
Standard Size [STD]: ;
ArticleState: Normal ;
Technical Information: The O.E. procedure requires that the intermediate shaft bushings are machined once fitted to optimize clearance, centring, and alignment. We therefore recommend our 'semi' bushings and to follow the same procedure. ;
Technical Information: For intermediary shaft

for housing diameter from [mm]: 46 mm ;
to housing diameter [mm]: 46.025 mm ;
Width from [mm]: 15 mm ;
for wall thickness from [mm]: 1.48 mm ;
to wall thickness [mm]: 1.505 mm ;
for shaft diamater from [mm]: 42.959 mm ;
to shaft diameter [mm]: 42.975 mm ;
ArticleState: Normal

Machining: Semi ;
for housing diameter from [mm]: 46 mm ;
to housing diameter [mm]: 46.025 mm ;
Width from [mm]: 15 mm ;
for wall thickness from [mm]: 1.7 mm ;
to wall thickness [mm]: 1.77 mm ;
for shaft diamater from [mm]: 42.959 mm ;
to shaft diameter [mm]: 42.975 mm ;
ArticleState: Normal

Machining: Semi ;
for wall thickness from [mm]: 1.7 mm ;
to wall thickness [mm]: 1.77 mm ;
for shaft diamater from [mm]: 42.959 mm ;
to shaft diameter [mm]: 42.975 mm ;
for housing diameter from [mm]: 46 mm ;
to housing diameter [mm]: 46.025 mm ;
Width from [mm]: 15 mm ;
ArticleState: Normal ;
General Information: Mahle 029 LB 18191 300

Fitting Position: Rear ;
ArticleState: Normal ;
General Information: Glyco 07-3089 STD

Machining: Semi ;
for wall thickness from [mm]: 1.7 mm ;
to wall thickness [mm]: 3.27 mm ;
for shaft diamater from [mm]: 41.959 mm ;
to shaft diameter [mm]: 41.975 mm ;
for housing diameter from [mm]: 45 mm ;
to housing diameter [mm]: 45.025 mm ;
Width from [mm]: 15 mm ;
ArticleState: Article to be discontinued ;
General Information: Mahle 029 LB 18192 300

Notches / Holes Number: 3 ;
Machining: Hardened ;
Valve stem diameter [mm]: 7 mm ;
ArticleState: Normal ;
General Information: Trw MK-7H

for wall thickness from [mm]: 1.7 mm ;
to wall thickness [mm]: 1.77 mm ;
for shaft diamater from [mm]: 41.959 mm ;
to shaft diameter [mm]: 41.975 mm ;
for housing diameter from [mm]: 45 mm ;
to housing diameter [mm]: 45.025 mm ;
Width from [mm]: 15 mm ;
ArticleState: Normal ;
General Information: Mahle 029 LB 18192 000

Height [mm]: 26 mm ;
Operating Mode: Hydraulic ;
Outer diameter [mm]: 35 mm ;
ArticleState: Normal ;
General Information: Ina/luk 420 0043 10

Fitting Position: Front ;
ArticleState: Normal ;
General Information: Glyco 07-3088 STD