ArticleState: No longer supplied by manufacturer

Operating Mode: Hydraulic ;
Outer diameter [mm]: 35 mm ;
Height [mm]: 26 mm ;
Alternative Repair Kit: 45-4045 ;
ArticleState: Normal

Thickness [mm]: 26 mm ;
Outer diameter [mm]: 35 mm ;
Operating Mode: Hydraulic ;
Weight [kg]: 0.056 kg ;
Observe service information: ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Fitting Position: Front ;
Machining: Semi ;
Component Number: 07-3088 ;
ArticleState: Normal ;
Technical Information: The O.E. procedure requires that the intermediate shaft bushings are machined once fitted to optimize clearance, centring, and alignment. We therefore recommend our 'semi' bushings and to follow the same procedure. ;
Technical Information: For intermediary shaft

Machining: Semi ;
for housing diameter from [mm]: 45 mm ;
to housing diameter [mm]: 45.025 mm ;
Width from [mm]: 15 mm ;
for wall thickness from [mm]: 1.7 mm ;
to wall thickness [mm]: 3.27 mm ;
for shaft diamater from [mm]: 41.959 mm ;
to shaft diameter [mm]: 41.975 mm ;
ArticleState: Article to be discontinued

Operating Mode: Hydraulic ;
Outer diameter [mm]: 35 mm ;
Height [mm]: 26 mm ;
ArticleState: Normal

Fitting Position: Rear ;
ArticleState: Normal ;
General Information: Glyco 07-3089 STD

Thickness [mm]: 26 mm ;
Length [mm]: 26 mm ;
Operating Mode: Hydraulic ;
Outer diameter [mm]: 35 mm ;
ArticleState: Normal ;
General Information: Kolbenschmidt 50006460

Fitting Position: Front ;
Machining: Semi ;
ArticleState: Normal ;
General Information: Glyco 07-3088 SEMI

Thickness [mm]: 26 mm ;
Weight [kg]: 0.056 kg ;
Operating Mode: Hydraulic ;
Outer diameter [mm]: 35 mm ;
ArticleState: Normal ;
General Information: Swag 30180003

Notches / Holes Number: 1 ;
Machining: Hardened ;
Valve stem diameter [mm]: 7 mm ;
ArticleState: Normal ;
General Information: Trw RK-7H

Fitting Position: Rear ;
Machining: Semi ;
ArticleState: Normal ;
General Information: Glyco 07-3089 SEMI

Operating Mode: Hydraulic ;
ArticleState: Normal ;
General Information: Ae FOL143