Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 111 mm ;
Outer diameter [mm]: 163 mm ;
Width [mm]: 15,5 mm ;
ArticleState: Normal

Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 42 mm ;
Width [mm]: 7 mm ;
Inner diameter [mm]: 110 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
ArticleState: Normal

Shape: Round ;
Width 1 [mm]: 7 mm ;
Outer diameter 1 [mm]: 42 mm ;
Inner diameter 1 [mm]: 32 mm ;
ArticleState: Normal

Fitting Position: Transmission End ;
Inner diameter [mm]: 84,5 mm ;
ArticleState: Normal

Fitting Position: Timing End ;
Inner diameter 1 [mm]: 32 mm ;
Outer diameter 1 [mm]: 42 mm ;
Height 1 [mm]: 8 mm ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal

Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 85 mm ;
Outer diameter 1 [mm]: 131,4 mm ;
Outer diameter 2 [mm]: 152,7 mm ;
Height 1 [mm]: 15,5 mm ;
Material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) ;
Supplementary Article/Info 2: with synthetic carrier ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal

Observe mounting information: ;
Inner diameter [mm]: 85 mm ;
Radial Shaft Seal Design: IWD ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene) ;
Housing Type: with housing ;
Housing Type: Housing with Aluminium Lid ;
Supplementary Article/Info 2: with mounting sleeve ;
Part number of the recommended special tools: VW T10017 ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren

Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 42 mm ;
Width [mm]: 6 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: Normal

Supplementary Article/Info 2: with mounting sleeve ;
Version: integrierter Wedi ;
ArticleState: Normal

Fitting Position: Timing End ;
Thickness [mm]: 6 mm ;
Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 42 mm ;
ArticleState: Article to be discontinued ;
General Information: https://www.autoteile.de/produkt/V10-3259-1

Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with mounting sleeve ;
Version: integrierter Wedi ;
ArticleState: Normal

Width [mm]: 12 mm ;
Width [mm]: 7 mm ;
Inner diameter [mm]: 110 mm ;
Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 130 mm ;
Outer diameter [mm]: 42 mm ;
ArticleState: Normal ;
General Information: Ajusa 15068600

Width [mm]: 6 mm ;
Width [mm]: 7 mm ;
Material: NBR (nitrile butadiene rubber) ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 42 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Glaser P77313-01

Fitting Position: Timing End ;
Height [mm]: 6 mm ;
Height 1 [mm]: 7 mm ;
Height 2 [mm]: 7 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 42 mm ;
Radial Shaft Seal Design: 829S RD W ;
Rotation Direction: Clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NA5185

Fitting Position: Pulley side ;
ArticleState: Normal ;
General Information: Corteco 289087

Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 85 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: IWD ;
Housing Type: Housing with Plastic Lid ;
Supplementary Article/Info 2: with mounting sleeve ;
Part number of the recommended special tools: VW T10017 ;
ArticleState: Article to be discontinued ;
General Information: Elring 458.820

Fitting Position: Transmission End ;
Required quantity: 1 ;
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with flange ;
ArticleState: Normal ;
General Information: Swag 30947899