SSG.ASIA - AUTO SPARE PARTS ONLINE STORE | UNITED ARAB EMIRATES (UAE)

Search by online catalogue

Search by supplier:
Supplier
Number
Part name
Criteria
Show Article Details
ELRING 152.320 Shaft Seal, crankshaft
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
090.510 Shaft Seal, crankshaft
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne Zusatz von Öl oder Fett montieren
ET ENGINETEAM LH001400 Main Bearings, crankshaft
Standard Size [STD]: ;
Quantity Unit: Set ;
ArticleState: Normal
LA001100 Thrust Washer, crankshaft
ArticleState: Normal
LH001425 Main Bearings, crankshaft
Oversize [mm]: 0.25 mm ;
Quantity Unit: Set ;
ArticleState: Normal
FEBI BILSTEIN 09895 Shaft Seal, crankshaft
Thickness [mm]: 15 mm ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Material: MVQ (Silicone Elastomer) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.105 kg ;
ArticleState: Normal ;
General Information: für Schwungrad ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.
GLASER P77750-01 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
P77749-01 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
GLYCO A232/4 STD Thrust Washer, crankshaft
Component Number: 4681BF ;
Standard Size [STD]: ;
ArticleState: Normal
72-4072 0.50mm Main Bearings, crankshaft
Component Number: 72-4072 ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal
H1103/7 STD Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 4681CP ;
Standard Size [STD]: ;
ArticleState: Normal
72-4072 STD Main Bearings, crankshaft
Component Number: 72-4072 ;
Standard Size [STD]: ;
ArticleState: Normal
72-4072 0.25mm Main Bearings, crankshaft
Component Number: 72-4072 ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal
H1103/7 0.25mm Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 4681CP ;
Oversize [mm]: 0.25 mm ;
ArticleState: No longer supplied by manufacturer
GOETZE 50-319620-00 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 145 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 175 mm ;
ArticleState: in Preparation
MAHLE ORIGINAL 061 HS 19155 025 Crankshaft Bearing Set
Oversize [mm]: 0.25 mm ;
Component Number: 061HL19078025 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.134 mm ;
for housing diameter from [mm]: 112.2 mm ;
to housing diameter [mm]: 112.222 mm ;
Width from [mm]: 34.05 mm ;
Width to [mm]: 34.3 mm ;
for wall thickness from [mm]: 2.18 mm ;
to wall thickness [mm]: 2.195 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: only supplied in parts list
061 AS 20087 000 Thrust Washer, crankshaft
Component Number: 061AL20086000 ;
for housing diameter from [mm]: 143.7 mm ;
to housing diameter [mm]: 144.1 mm ;
for wall thickness from [mm]: 3.38 mm ;
to wall thickness [mm]: 3.43 mm ;
for shaft diamater from [mm]: 118.65 mm ;
to shaft diameter [mm]: 119 mm ;
ArticleState: Normal
061 HS 19155 050 Crankshaft Bearing Set
Oversize [mm]: 0.5 mm ;
Component Number: 061HL19078050 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.134 mm ;
for housing diameter from [mm]: 112.2 mm ;
to housing diameter [mm]: 112.222 mm ;
Width from [mm]: 34.05 mm ;
Width to [mm]: 34.3 mm ;
for wall thickness from [mm]: 2.305 mm ;
to wall thickness [mm]: 2.32 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: only supplied in parts list
061 HS 19155 000 Crankshaft Bearing Set
Component Number: 061HL19078000 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.134 mm ;
for housing diameter from [mm]: 112.2 mm ;
to housing diameter [mm]: 112.222 mm ;
Width from [mm]: 34.05 mm ;
Width to [mm]: 34.3 mm ;
for wall thickness from [mm]: 2.055 mm ;
to wall thickness [mm]: 2.07 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: only supplied in parts list
PAYEN NA5300 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: ASW ;
Inner diameter [mm]: 120 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 140 mm ;
ArticleState: Normal
SAMPA 041.146 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
021.261 Main Bearings, crankshaft
Weight [kg]: 0.51 kg ;
Inner diameter [mm]: 25 mm ;
Outer diameter [mm]: 62 mm ;
Height [mm]: 17 mm ;
ArticleState: Normal
041.143 Shaft Seal, crankshaft
Weight [kg]: 0.38 kg ;
Fitting Position: Timing End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
041.147 Shaft Seal, crankshaft
Fitting Position: Transmission End ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
041.145 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: No longer supplied by manufacturer
041.149 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12.75 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
STELLOX 81-01377-SX Shaft Seal, crankshaft
Fitting Position: Timing End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 140 mm ;
Inner diameter 1 [mm]: 120 mm ;
ArticleState: Normal
VICTOR REINZ 81-35996-00 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
81-35997-00 Shaft Seal, crankshaft
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
WILMINK GROUP WG1105078 Thrust Washer, crankshaft
for wall thickness from [mm]: 3.38 mm ;
to wall thickness [mm]: 3.43 mm ;
for shaft diamater from [mm]: 118.65 mm ;
to shaft diameter [mm]: 119 mm ;
for housing diameter from [mm]: 143.7 mm ;
to housing diameter [mm]: 144.1 mm ;
ArticleState: Normal ;
General Information: Mahle 061 AS 20087 000
WG1260783 Crankshaft Bearing Set
for wall thickness from [mm]: 2.18 mm ;
to wall thickness [mm]: 2.195 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 112.2 mm ;
to housing diameter [mm]: 112.222 mm ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.134 mm ;
Oversize [mm]: 0.25 mm ;
Width from [mm]: 34.05 mm ;
Width to [mm]: 34.3 mm ;
ArticleState: only supplied in parts list ;
General Information: Mahle 061 HS 19155 025
WG1151028 Shaft Seal, crankshaft
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 090.510
WG1250274 Shaft Seal, crankshaft
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: without twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35996-00
WG1185824 Main Bearings, crankshaft
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
General Information: Glyco 72-4072 0.25MM
WG1185948 Thrust Washer, crankshaft
ArticleState: Normal ;
General Information: Glyco A232/4 STD
WG1260784 Crankshaft Bearing Set
for wall thickness from [mm]: 2.305 mm ;
to wall thickness [mm]: 2.32 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 112.2 mm ;
to housing diameter [mm]: 112.222 mm ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.134 mm ;
Oversize [mm]: 0.5 mm ;
Width from [mm]: 34.05 mm ;
Width to [mm]: 34.3 mm ;
ArticleState: only supplied in parts list ;
General Information: Mahle 061 HS 19155 050
WG1151030 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 152.320
WG1250275 Shaft Seal, crankshaft
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35997-00
WG1093791 Main Bearings, crankshaft
ArticleState: Normal ;
General Information: Glyco 72-4072 STD
WG1185825 Main Bearings, crankshaft
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
General Information: Glyco 72-4072 0.50MM
WG1213215 Crankshaft Bearing Set
for wall thickness from [mm]: 2.055 mm ;
to wall thickness [mm]: 2.07 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 112.2 mm ;
to housing diameter [mm]: 112.222 mm ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.134 mm ;
Width from [mm]: 34.05 mm ;
Width to [mm]: 34.3 mm ;
ArticleState: only supplied in parts list ;
General Information: Mahle 061 HS 19155 000
WG1183270 Shaft Seal, crankshaft
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Radial Shaft Seal Design: ASW ;
Rotation Direction: Clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NA5300
WG1093922 Main Bearings, crankshaft
Position / Degree: 1,2,3,4,5,6,7 º ;
ArticleState: Normal ;
General Information: Glyco H1103/7 STD
2024 CATCAR.INFO (v 2.0)