Fitting Position: Front ; Machining: Semi ; Component Number: 07-3088 ; ArticleState: Normal ; Technical Information: The O.E. procedure requires that the intermediate shaft
bushings are machined once fitted to optimize clearance,
centring, and alignment. We therefore recommend our 'semi'
bushings and to follow the same procedure.
; Technical Information: For intermediary shaft
07-3088 STD
Bush, rocker arm
Fitting Position: Front ; Component Number: 07-3088 ; Standard Size [STD]: ; ArticleState: Normal ; Technical Information: The O.E. procedure requires that the intermediate shaft
bushings are machined once fitted to optimize clearance,
centring, and alignment. We therefore recommend our 'semi'
bushings and to follow the same procedure.
; Technical Information: For intermediary shaft
WILMINK GROUP
WG1185132
Bush, rocker arm
Fitting Position: Front ; Machining: Semi ; ArticleState: Normal ; General Information: Glyco 07-3088 SEMI
WG1211969
Bush, rocker arm
for wall thickness from [mm]: 1.48 mm ; to wall thickness [mm]: 1.505 mm ; for shaft diamater from [mm]: 42.959 mm ; to shaft diameter [mm]: 42.975 mm ; for housing diameter from [mm]: 46 mm ; to housing diameter [mm]: 46.025 mm ; Width from [mm]: 15 mm ; ArticleState: Normal ; General Information: Mahle 029 LB 18191 000
WG1093693
Bush, rocker arm
Fitting Position: Front ; ArticleState: Normal ; General Information: Glyco 07-3088 STD
WG1258632
Bush, rocker arm
Machining: Semi ; for wall thickness from [mm]: 1.7 mm ; to wall thickness [mm]: 1.77 mm ; for shaft diamater from [mm]: 42.959 mm ; to shaft diameter [mm]: 42.975 mm ; for housing diameter from [mm]: 46 mm ; to housing diameter [mm]: 46.025 mm ; Width from [mm]: 15 mm ; ArticleState: Normal ; General Information: Mahle 029 LB 18191 300