Engine Code: 169 A 1.000 ; Construction year from: 05.2006 ; Fuel Mixture Formation: Common Rail (CR) ; ArticleState: Normal
ASHUKI
K234-01
Injector Nozzle
Fuel Mixture Formation: Common Rail (CR) ; Supplementary Article/Info 2: with seal ; ArticleState: Normal
BOSCH
0 445 110 183
Injector Nozzle
Fuel Mixture Formation: Common Rail (CR) ; Supplementary Article/Info 2: IMA coded ; Supplementary Article/Info 2: with seal ; ArticleState: Normal
0 986 435 102
Injector Nozzle
Service exchange part: ; Fuel Mixture Formation: Common Rail (CR) ; Supplementary Article/Info 2: IMA coded ; Supplementary Article/Info 2: with seal ; ArticleState: Normal
DIPASPORT
INJB060N
Injector Nozzle
TecDoc Engine Number: FIAT 169 A1.000 ; ArticleState: Normal
FISPA
405153
Cable Repair Set, injector valve
for article number: 405153 ; ArticleState: Normal
81.411
Injector
ArticleState: not available
HERTH+BUSS ELPARTS
51277164
Cable Repair Set, injector valve
Fitting Position: Injector Nozzle ; Supplementary Article/Supplementary Info: with socket housing ; Number of Poles: 2 pólos ; Cable Length [mm]: 500 mm ; Supplementary Article/Info 2: with pipe ; Cable Cross Section [mm²]: 2.5 mm² ; Temperature range from [°C]: -25 ºC ; Temperature range to [°C]: 140 ºC ; Current carrying capacity [A]: 19 A ; Operating voltage [V]: 100 V ; Cable insulation material: Silicone ; Plug housing design: Plug sleeve housing ; ArticleState: Normal
LAUBER
41.0183
Injector Holder
Warranty: 2 years warranty ; Service exchange part: ; Fuel Mixture Formation: Common Rail (CR) ; ArticleState: not available
METZGER
0870048
Injector Nozzle
Generally overhauled: ; Fuel Mixture Formation: Common Rail (CR) ; Supplementary Article/Info 2: IMA coded ; Supplementary Article/Info 2: with seal ; Required quantity: 4 ; ArticleState: Normal ; General Information: 12 Monate Gewährleistung
; Technical Information: Beim Ersetzen der Kraftstoffinjektoren muss deren Injektor
Mengen Ausgleichs - Codierung (IMA Codierung) im Steuergerät
hinterlegt werden
2324015
Cable Repair Set, injector valve
Fitting Position: Injector Nozzle ; Cable cross-section from [mm²]: 1.5 mm² ; Cable cross-section to [mm²]: 1.5 mm² ; Cable insulation material: Silicone ; Material: CuSn (copper-tin) ; Plug Type: Shrink Connector ; Number of circuits: 2 ; Length [cm]: 50 cm ; Version: FIAT 1.9 D Multijet ; Version: OPEL 1.9 D ; ArticleState: Normal
